InTemp* VFC Temperature Data Logger with 6.6' probe & 15 ml bottle, -40 deg to 100 deg C, Wireless Data Standard: Bluetooth Low Energy, Radio Power: 1 mW (0 dBm), Battery Type: Two AAA 1.5 V alkaline or lithium batt
HOBO* Pendant Wireless Temperature/Light Data Logger, compact, waterproof, light sensor for accurate light intensity readings in the visible light spectrum, wireless setup and download via Bluetooth Low Energy (BLE), +/- 0.5 deg C (+/-0.9 deg F) accuracy
InTemp* Bluetooth Low Energy Temperature Data Logger, With 2m Temperature Probe, Logger Operating Range: -30 to 70 deg C, Transmission Range: Approximately 30.5 m (100 ft) line-of-sight, Battery Type Two AAA 1.5 V
Go Direct* Electrode Amplifier, is a mV and pH amplifier that connects to Vernier electrodes and compatible third-party BNC electrodes, Specifications: Units: pH or mV, Input range (mV): +/-1000 mV, Input range: 0 to 14 pH, Connections: Wireless Bluetooth, Wired: USB
Go Direct* Conductivity Probe, determines the ionic content of an aqueous solution by measuring its electrical conductivity, Range: 0 to 20,000 uS/cm, Temperature compensation: Automatic from 5 to 35 deg C, can be turned off, Temperature range: 0 to 80 deg C
Go Direct* Constant Current System, is a DC power source with a built-in current probe designed for use in electrochemistry experiments, Specifications, Range: 0 to 0.6 A, Supply voltage: 5 VDC, Connections: Wireless Bluetooth, Wired USB
Go Direct ORP Electrode, Temperature range: 0-60 deg C, Dimension: 12 mm OD, Impedance: Approx 20 kOhm at 25 deg C, Redox potential range: -450 to +1100 mV, Type: Sealed, gel-filled, epoxy body, Ag/AgCl reference, ORP element: 99% pure platinum band sealed on a glass stem
Go Direct* Radiation Monitor, detects alpha, beta, gamma, and X-ray radiation, Sensor: LND 712 (or equivalent) halogen-quenched GM tube with a mica end window, 1.5 to 2.0 mg/cm2 thick, Red LED blinks on radiation detection, Optional audio signal on radiation detection
Go Direct* ORP (Oxidation-Reduction Potential) Sensor, measures the ability of a solution to act as an oxidizing or reducing agent, Type: Sealed, gel-filled, epoxy body, Ag/AgCl reference, Storage solution: pH-4/KCl solution, Temperature range: 0 to 60 degree 'C, 12 mm OD
Go Direct* Motion Detector, uses ultrasound to measure the position, velocity, and acceleration of moving objects, Maximum data collection rate: 30 samples/s, Distances measured from 15 cm to 2.5 m, Temperature compensated, 1/4-20 threaded hole, 1.5 m USB cable
Go Direct* Voltage Probe, combines a wide input voltage range and high precision, Specifications: Input voltage range: +/-15.0 V, Maximum voltage on any input: +/-15 V, Typical resolution: 0.5 mV, Power: Internal rechargeable battery, Wireless: Bluetooth, Wired: USB
Go Direct* Force and Acceleration Sensor, couples a 3-axis accelerometer with a stable and accurate force sensor that measures forces as small as +/- 0.1 N and up to +/- 50 N, Acceleration: 3 axis, +/- 16 g, Gyroscope: 3 axis, 2000 deg /s
Go Direct* Light and Color Sensor, is a powerful and versatile light sensor that measures light in the visible to ultraviolet electromagnetic spectrum, light intensity in the visible range, UVA, and UVB portions of the electromagnetic spectrum
Eight Channel Biopotential Amplifier, allows multiple channels of EMG, ECG, EOG to be recorded simultaneously from a single exercising or resting subject, with LabScribe Recording and Analysis Software, Portable, USB
Go Direct* Gas Pressure Sensor, measures the absolute pressure of a gas, Specifications: Range: 0 to 400 kPa, Resolution: 0.03 kPa, Maximum pressure that the sensor can tolerate without permanent damage: 450 kPa, Connections: Wireless Bluetooth, Wired USB
Go Direct* pH Sensor, is a general-purpose pH sensor used to monitor pH of aqueous solutions, pH range: 0-14, Type: Sealed, gel-filled, epoxy body, Ag/AgCl reference, Shaft diameter: 12 mm OD, Storage solution: pH-4/KCl solution (10 g KCl in 100 mL buffer pH-4 solution)
Go Direct* Temperature Probe, is a rugged, general-purpose temperature sensor that students can use to monitor temperature, Temperature range: -40 to 125 deg C, Handle temperature range: -10 to 45 deg C, Resolution: 0.07 deg C, Connections: Wireless Bluetooth, Wired USB
Go Direct* Colorimeter, measures absorbance or transmittance of a liquid sample, Specifications: Range: 0 to 3 (absorbance), Useful range: 0.05 to 1.0 (absorbance), 90% to 10% transmittance (%T), Wavelengths: 430 nm, 470 nm, 565 nm, 635 nm, Connections: Bluetooth, USB
Go Direct* 3-Axis Magnetic Field Sensor, allows you to determine the magnitude and direction of the magnetic field at any point in space, Measurement range: +/-5 Mt, Operating temperature: -40 deg C to 85 deg C, Dimensions: 19x12.2x0.7 cm, Factory-calibrated
Go Direct* Drop Counter, precisely records the number of drops of titrant added during a titration and then automatically converts it to volume, Accurate drop counting at rates up to 6 drops/s, Dimensions: 15.5x4.5x1.8 cm, Opening for drops: 3 cm, Ring stand opening: 16 mm
Go Direct* Melt Station, accurately determines the melting temperature of solid substances, Body Dimensions: 9 cm x 9 cm x 24 cm, Base Dimensions: 13 cm x 15 cm x 1.5 cm, Range: Ambient to 260 deg C, Lighting of control dial: Red LED, Blue LED, Yellow LED, Weight: 1.0 kg
Data Loggers
Print…
List View
Easy View (new)
Facebook
Twitter
YouTube
Pinterest
Instagram