KidWind Blade Pitch Protractor, incredibly helpful for measuring the blade pitch angle on your KidWind turbine, Recommended for College, High School, and Middle School Science
Lanyard, works as a LabQuest neck strap to prevent accidental drops while doing field studies. It can also be attached to a calculator cradle and used with a LabPro or CBL 2
KidWind Motor Mount Pack, secures a motor to the nacelle, Includes: Two blue plastic motor mounts, Mounting screws and nuts, Recommended for College and High School
KidWind High Torque Generator with Wires, High Torque Generator produces lower voltage but higher current for a given rotor speed, Recommended for College and High School
Standard USB Adapter, allows to be connected to computer for data collection using Logger Pro or Logger Lite software, Connector 1: USB Mini Type A Receptacle, Connector 2: USB Standard Type A Plug, can also be used with the USB cable that comes with the CBR 2
MIcrostirrer, easily attaches to end of a pH Sensor, Conductivity Probe, Dissolved Oxygen Probe or Ion-Selective Electrode. Magnetic field turns paddle wheel of Microstirrer, resulting in enhanced stirring near electrode tip, works with any magnetic stirrer
Noseclip, plastic, foam-padded noseclips help increase the accuracy of spirometry results by eliminating the escape of air through the nostrils during testing
Analog Breadboard Cable, provides an easy way for students to build their own sensor circuitry and input signal into a interface for data acquisition, six pins available: SIG1, 5V, ID, VRES, GND, and SIG2, with standard British Telecom Analog (BTA) connector
KidWind Dowel, Recommended for College, High School, and Middle School Science, Diameter: 0.25 in, Length: 5 in, used for designing and testing wind turbine blades, and they fit into the KidWind Wind Turbine Hub, D100
Digital Extension Cable, 1.5 m long, can be used with any sensor that connects to a digital channel. Port will be labeled DIG1 or DIG2. Each cable is 2 meters in length
Analog Extension Cable, 1.5 m long, can be used with any sensor that connects to an analog channel labeled CH1, CH2, CH3, or CH4. Each cable is 2 meters in length
Go Direct* Sensor Clamp, securely fastens to a wand-style Go Direct sensor, and the included lanyard works as a strap to prevent accidental drops during investigations in the field
Mouthpiece, Disposable, For a more sterile environment, use the cardboard mouthpieces to help eliminate the spreading of contagious material between students
KidWind Nacelle, includes the KidWind Nacelle and the Motor Mount Pack, 2 Nacelle body halves, Motor Mount Pack, Recommended for College and High School
KidWind Chipboard Sheet, stiff, easy to cut, lightweight, low cost, and recyclable material used to make simple wind turbine blades, Length: 12 in, Width: 3 in, Thickness: 1.5 mm
KidWind 2V/400mA Solar Panel, C0034, for demonstrations and experiments. External screw terminals and attached clip cords make the panels easy to use, Dimensions: 62 mm x120 mm
Adapter allows to be connected to a computer for data collection using Logger Pro or Logger Lite software, It has an USB Mini-A receptacle that connects to EasyTemp or EasyLink and a standard-A plug that connects to computer
KidWind Wind Turbine Hub, three-pack of 12-hole crimping hubs, made from recycled plastic, allows you to turn any DC generator into a wind turbine, Diameter: 2.25 in, Maximum number of dowels: 12, Size of shaft hub press fits onto: 2 mm
Melt Station, Weight: 1.0 kg, Capillary tubes: 1.4-1.8 mm outside diameter, 100 mm length, Capillary tube slots: 3, Viewing Lens: 27 mm diameter, Resolution: 0.10 C, Lighting of capillary slots: 3 white LEDs, Accuracy: +/- 0.31 + 0.0006T, where T is temperature in Celsius
High Torque Generator with Wires, produces lower voltage but higher current for a given rotor speed, has 4-foot leads with shrink-wrap reinforced soldering, with 2 mm driveshaft as the standard Wind Turbine Generator, for load devices with higher current draw, such as water pump
Interface Shield provides a convenient way to make connections from microcontrollers to sensors. Shield plugs directly on top of and adds two BTA (analog) and two BTD (digital) sockets, be used with SparkFun RedBoard, also works with Intel Galileo
Friction Pad DTS to your Vernier, Standard Cart, Plunger Cart, or Motion Encoder Cart, and watch the carts move under very consistent friction force. Setting the friction amount is as simple as turning a knob
PH Buffer Capsule for calibration of pH, contains four capsules for each of the 4, 7, and 10 pH buffers, making a total of 12 capsules. The set also includes a small bottle of universal indicator with mold inhibitor, Has to be added to 100 ml of distilled water
KidWind Wind Turbine Generator with Wire,Voltage output: 0-10 V, Amperage output: 0-0.3 A, Diameter: 1.25 in, Wire length: 4 ft, Shaft diameter: 2 mm, Recommended for College, High School, and Middle School Science
Inductor, made from 20 gauge copper wire. It has an inductance of 5 mH and low resistance. A metal core can be added to increase inductance, The ends of the coil wire are exposed so that you can easily make connections to the Circuit Board or to
Heart Rate Receiver, collect heart rate data from either the Hand-Grip Transmitter or the Chest Belt Transmitter, For use with Go Wireless Heart Rate, Go Wireless Exercise Heart Rat
Disposable Bacterial Filter, disposable microbacterial filter significantly reduces need to sterilize your spirometers flow head, 30 mm ID opening allows for an easy, air-tight fit to the flow head
EasyTemp temperature sensor, mini-A USB connector that allows you to attach the temperature probe directly to the USB port of a TI-84 Plus graphing calculator or TI-Nspire handheld, Connecting the sensor to the calculator will automatically launch
Book, Renewable Energy with Vernier, Recommended for High School, features 26 experiments in wind and solar energy, contains a combination of explorations, traditional experiments, inquiry investigations, engineering projects
VSMT Tackle Kit, For use with Vernier Structures & Materials Tester, includes a 50 x 50 x 6 mm and a 50 x 80 x 6 mm aluminum load plate, chain, threaded rods, U-bolts, and other accessories, connecting threaded parts are 1/4inch diameter material and 20 threads per inch
Independence of Motion, enables the Projectile Launcher to perform the classic experiment where one ball is dropped as another is projected horizontally. The balls strike the floor simultaneously. A built-in level makes leveling th
Spirometer, designed to make human respiratory measurements at rest and during moderate activity. Used to perform a variety of experiments related to air flow and lung volume. Removable flow head (22 mm ID/30 mm OD) makes it easy to clean and sterilize
KidWind Solar Thermal Exploration Kit, modeled after a domestic solar water-heating system. Explore variables such as box color, light intensity, tube design, rate of water pumping, and amount of time it takes to heat the water
Print…
List View
Easy View (new)
Facebook
Twitter
YouTube
Pinterest
Instagram